MD 4C EX VARIO +AK+EKVARIO® chemistry vacuum system
Overview
- full advantage of ATEX chemistry diaphragm pumps with separator AK and emission condenser EK
- VARIO®: short process times due to hysteresis-free VARIO® vacuum control
- VARIO®: VARIO®-pump operates on demand only as fast as necessary – minimal power consumption, extended maintenance intervals, silent operation
- VARIO®: Vacuum controller VACUU·SELECT (optional) for precise vacuum control and fully automatic processes
- ATEX vacuum sensor and Connection Box 100 for easy installation – from one source
Ultimate vacuum
3 mbar
Ultimate vacuum with gas ballast
10 mbar
Max. pumping speed 50 Hz
3.7 m3/h
VARIO® chemistry vacuum system in action
With the new ATEX VARIO® chemistry diaphragm pumps and vacuum systems, the vacuum can be precisely controlled by the motor speed. The VARIO® pump is driven by an additional control signal line. The optional vacuum controller VACUU·SELECT with ATEX vacuum sensor and Connection Box 100 enable fully automatic evaporations without the need for parameter settings or user programming. With the adaptive control it finds the boiling pressure independently and adjusts the vacuum continuously and optimally according to the vapor pressure. The vacuum controller and the Connection Box 100 are installed in a non-hazardous area.
Technical data and graphs
Max. pumping speed 50 Hz | 3.7 m3/h | Select diagram |
Ultimate vacuum | 3 mbar / 2.3 torr | |
Ultimate vacuum with gas ballast | 10 mbar / 7.5 torr | |
Number of heads | 4 | |
Number of stages | 3 | |
Vacuum controller | without controller | |
Lower ambient temperature (operation) | 10 °C | |
Upper ambient temperature (operation) | 40 °C | |
Lower ambient temperature (storage) | -10 °C | |
Upper ambient temperature (storage) | 60 °C | |
Max. outlet pressure (abs.) | 1.1 bar | |
Inlet connection | small flange KF DN 25 | |
Outlet connection | Hose nozzle DN 8-10 mm | |
Coolant connection | 2 x hose nozzle DN 6-8 mm | |
Rated motor power | 0.25 kW | |
Minimum motor speed VARIO in min-1 | 30 min-1 | |
Maximum motor speed VARIO in min-1 | 1500 min-1 | |
Rated motor speed at 50/60 Hz | 1500 min-1 | |
Protection class IEC 60529 | IP 54 | |
Dimension L in mm | 600 mm | |
Dimension B in mm | 365 mm | |
Dimension H in mm | 420 mm | |
Weight | 36 kg | |
Noise (sound pressure level) in dBA at 50 Hz or 1500 rpm/62% (VARIO)/1500 rpm (VARIO-SP)/12500 Upm (VACUU·PURE®) | 42 dBA | |
ATEX conformity | Pumping chamber (pumped gases): II 2G Ex h IIC T3 Gb X, Environment with inert purge gas: II 2G Ex h IIB T4 Gb X, Environment without inert purge gas: II 3G Ex h IIB T4 Gc X, Motor: II 2G Ex db IIB T4 Gb | |
NRTL certification | No | |
Items supplied | Pumping unit completely mounted with inlet separator and emission condenser, ready for use, with manual. Shatter and shock protection for glass parts are to be provided by the customer. Speed control via 4-20 mA current loop (4 mA = 0 rpm, 20mA = 1500 rpm). Control signal and mains cable length 10 m, without plugs. | |
Rated mains voltage range 1 | 230 V | |
Mains frequency 1 | 50 Hz |
Downloads
Equipment
-
Connection Box 100 Connection box for ATEX VARIO pumps
- Surface-mounted insulated housing
- Pre-wired
DMP 331i KF DN 16 Vacuum sensor- With ATEX-certification II 1G Ex ia IIC T4 GA
- Measuring range 1000-1 mbar
- Accuracy: +-1 mbar
Cerabar PMP21 KF DN 16 Vacuum sensor- With ATEX certification: II 2G Ex ia IIC T4 Gb
- Measuring range 1000-1 mbar
- Accuracy: better than +-3 mbar
KF DN 25, 1000 mm PTFE-tubing (antistatic) with small flanges- PTFE (antistatic) / stainless steel
- Nominal width KF DN 25 mm | length 1000 mm
- Leak rate 1 x 10-4 mbar l/s
VACUU·BUS® Analog-I/O-Module IN 4-20mA/OUT 0-10V VACUU·BUS®- Analog interface
- Colored LED status display
VACUU·BUS® VACUU·BUS cable 2 m with male plug and with litz wires- VACUU·BUS® Accessory
- With male plug and litz wires
MZ 2C EX, MD 4C EX (2x), MV 10C EX (4x) Set of diaphragms and valves- Complete kit
- Original spare parts
- Easy assembly
This might also interest you
-
MZ 2C EX Chemistry diaphragm pump
- Ultimate vacuum 12 mbar
- ATEX conformity
- Oilfree & chemically resistant
MZ 2C EX +AK+EK Chemistry vacuum system- Ultimate vacuum 12 mbar
- ATEX conformity
- Oilfree & chemically resistant
MD 4C EX Chemistry diaphragm pump- Ultimate vacuum 3 mbar
- ATEX conformity
- Oilfree & chemically resistant
MD 4C EX +AK+EK Chemistry vacuum system- Ultimate vacuum 3 mbar
- ATEX conformity
- Oilfree & chemically resistant
MD 4C EX VARIO VARIO® chemistry diaphragm pump- Ultimate vacuum 3 mbar
- ATEX conformity
- Oilfree & chemically resistant
MV 10C EX VARIO Chemistry diaphragm pump- Ultimate vacuum 2 mbar
- ATEX conformity
- Oilfree & chemically resistant
MV 10C EX VARIO +AK+EK VARIO® chemistry diaphragm pump- Ultimate vacuum 2 mbar
- ATEX conformity
- Oilfree & chemically resistant
VARIO® chemistry vacuum system in action
With the new ATEX VARIO® chemistry diaphragm pumps and vacuum systems, the vacuum can be precisely controlled by the motor speed. The VARIO® pump is driven by an additional control signal line. The optional vacuum controller VACUU·SELECT with ATEX vacuum sensor and Connection Box 100 enable fully automatic evaporations without the need for parameter settings or user programming. With the adaptive control it finds the boiling pressure independently and adjusts the vacuum continuously and optimally according to the vapor pressure. The vacuum controller and the Connection Box 100 are installed in a non-hazardous area.
Technical data and graphs
Max. pumping speed 50 Hz 3.7 m3/h Select diagram Ultimate vacuum 3 mbar / 2.3 torr Ultimate vacuum with gas ballast 10 mbar / 7.5 torr Number of heads 4 Number of stages 3 Vacuum controller without controller Lower ambient temperature (operation) 10 °C Upper ambient temperature (operation) 40 °C Lower ambient temperature (storage) -10 °C Upper ambient temperature (storage) 60 °C Max. outlet pressure (abs.) 1.1 bar Inlet connection small flange KF DN 25 Outlet connection Hose nozzle DN 8-10 mm Coolant connection 2 x hose nozzle DN 6-8 mm Rated motor power 0.25 kW Minimum motor speed VARIO in min-1 30 min-1 Maximum motor speed VARIO in min-1 1500 min-1 Rated motor speed at 50/60 Hz 1500 min-1 Protection class IEC 60529 IP 54 Dimension L in mm 600 mm Dimension B in mm 365 mm Dimension H in mm 420 mm Weight 36 kg Noise (sound pressure level) in dBA at 50 Hz or 1500 rpm/62% (VARIO)/1500 rpm (VARIO-SP)/12500 Upm (VACUU·PURE®) 42 dBA ATEX conformity Pumping chamber (pumped gases): II 2G Ex h IIC T3 Gb X, Environment with inert purge gas: II 2G Ex h IIB T4 Gb X, Environment without inert purge gas: II 3G Ex h IIB T4 Gc X, Motor: II 2G Ex db IIB T4 Gb NRTL certification No Items supplied Pumping unit completely mounted with inlet separator and emission condenser, ready for use, with manual. Shatter and shock protection for glass parts are to be provided by the customer. Speed control via 4-20 mA current loop (4 mA = 0 rpm, 20mA = 1500 rpm). Control signal and mains cable length 10 m, without plugs. Rated mains voltage range 1 230 V Mains frequency 1 50 Hz für Zoom klicken
Max. pumping speed 50 Hz
für Zoom klicken
Pump down graph 50 Hz (100 l volume)
Downloads
Chemistry pumping unitMD 4C EX VARIO +AK+EK,three stage, 230 V / 50 Hz,with ATEX approval:pumping chamber (pumped gases):II 2G Ex h IIC T3 Gb Xenvironment (without inert purge gas):II 3G Ex h IIB T4 Gc XenvironmentMD 4C EX VARIO +AK+EK VARIO® chemistry vacuum systemEquipment
-
Connection Box 100 Connection box for ATEX VARIO pumps
- Surface-mounted insulated housing
- Pre-wired
DMP 331i KF DN 16 Vacuum sensor- With ATEX-certification II 1G Ex ia IIC T4 GA
- Measuring range 1000-1 mbar
- Accuracy: +-1 mbar
Cerabar PMP21 KF DN 16 Vacuum sensor- With ATEX certification: II 2G Ex ia IIC T4 Gb
- Measuring range 1000-1 mbar
- Accuracy: better than +-3 mbar
KF DN 25, 1000 mm PTFE-tubing (antistatic) with small flanges- PTFE (antistatic) / stainless steel
- Nominal width KF DN 25 mm | length 1000 mm
- Leak rate 1 x 10-4 mbar l/s
VACUU·BUS® Analog-I/O-Module IN 4-20mA/OUT 0-10V VACUU·BUS®- Analog interface
- Colored LED status display
VACUU·BUS® VACUU·BUS cable 2 m with male plug and with litz wires- VACUU·BUS® Accessory
- With male plug and litz wires
MZ 2C EX, MD 4C EX (2x), MV 10C EX (4x) Set of diaphragms and valves- Complete kit
- Original spare parts
- Easy assembly
This might also interest you
-
MZ 2C EX Chemistry diaphragm pump
- Ultimate vacuum 12 mbar
- ATEX conformity
- Oilfree & chemically resistant
MZ 2C EX +AK+EK Chemistry vacuum system- Ultimate vacuum 12 mbar
- ATEX conformity
- Oilfree & chemically resistant
MD 4C EX Chemistry diaphragm pump- Ultimate vacuum 3 mbar
- ATEX conformity
- Oilfree & chemically resistant
MD 4C EX +AK+EK Chemistry vacuum system- Ultimate vacuum 3 mbar
- ATEX conformity
- Oilfree & chemically resistant
MD 4C EX VARIO VARIO® chemistry diaphragm pump- Ultimate vacuum 3 mbar
- ATEX conformity
- Oilfree & chemically resistant
MV 10C EX VARIO Chemistry diaphragm pump- Ultimate vacuum 2 mbar
- ATEX conformity
- Oilfree & chemically resistant
MV 10C EX VARIO +AK+EK VARIO® chemistry diaphragm pump- Ultimate vacuum 2 mbar
- ATEX conformity
- Oilfree & chemically resistant