Vous passez maintenant à la boutique

Votre panier sera vidé lorsque vous changerez de pays/région.

Pompes HYBRID chimie

    • check-circle Vide limite 2 x 10⁻³ mbar
    • check-circle Débit 5.9 m³/h
    • check-circle Forte diminution du risque de corrosion

Foire aux questions (Pompes HYBRID chimie)

The chemistry HYBRID pump is the right choice for deep ultimate pressures down to 10⁻³ mbar combined with high vapor loads of aggressive or corrosive media. For solvent-intensive drying, distillation, or on the Schlenk line, the integrated diaphragm pump prevents condensation in the oil reservoir and continuously removes corrosive vapors. This extends oil change intervals, reduces the risk of corrosion, and keeps performance stable – often without an additional cold trap.
In many cases, yes. The continuous evacuation of the oil reservoir by the diaphragm pump prevents condensation and removes corrosive vapors, so that in practical operation a cold trap is often no longer necessary. This simplifies the setup, reduces operating costs (no liquid nitrogen or dry ice), and increases process safety. For extremely aggressive media or very high vapor loads, the need for a cold trap should be evaluated on a case-by-case basis.
Maintenance is significantly reduced thanks to HYBRID technology. Oil change intervals are considerably extended because the oil is less diluted by condensates or attacked by chemicals. Waste oil generation decreases. As with standard rotary vane pumps, the B-oil recommended by VACUUBRAND should be used, which is characterized by high chemical resistance and low vapor pressure.

Chemistry HYBRID pump for aggressive media

Advantages of HYBRID technology

Maintenance-friendly and process-safe

The chemistry HYBRID pump RC 6 from VACUUBRAND combines a two-stage rotary vane pump with a chemically resistant diaphragm pump into a corrosion-optimized solution. The integrated diaphragm pump continuously evacuates the oil reservoir of the rotary vane pump and removes corrosive vapors. This prevents condensate formation at corresponding pressure and temperature conditions even with aggressive vapors. Typical areas of application are freeze drying, distillation, vacuum drying ovens, and Schlenk line – wherever deep ultimate pressures down to 10⁻³ mbar are required under high solvent or chemical loads. In practical operation, a cold trap is often no longer necessary.
Compared to conventional rotary vane pumps, where condensate can dilute the oil and attack metallic components, the chemistry HYBRID solution delivers permanently reliable performance. Corrosive attack when working with aggressive vapors is greatly reduced. Ultimate pressure and pumping speed remain stable, while oil change intervals are considerably extended. Waste oil generation is significantly reduced. Additional advantages: excellent conductance characteristics with high pumping speed close to ultimate pressure, smooth running, and very good ultimate vacuum even with gas ballast. The integrated oil retention device prevents backflow during standstill.
The chemistry HYBRID pump RC 6 impresses with its maintenance-friendly design. The telescopic construction considerably facilitates service work. Optimized circulation lubrication and large usable oil volume additionally reduce maintenance effort. Thanks to continuous evacuation of the oil reservoir, process parameters remain reproducible and process safety increases. You secure the performance of a two-stage rotary vane pump with ultimate pressures down to 10⁻³ mbar and additional protection against corrosion – ideal for economical operation in demanding chemical processes.