MV 10C NTChemistry diaphragm pump
- outstanding chemical resistance and superior vapor tolerance
- reduced process time due to very high flow rates even close to ultimate vacuum
- very low vibration and quiet
- excellent ultimate vacuum even with gas ballast
- excellent environmental friendliness due to efficient solvent recovery (on models with EK accessory)
- Max. pumping speed 50 Hz:
- 9.5 m³/h
- Ultimate vacuum:
- 0.9 mbar
- Ultimate vacuum with gas ballast:
- 1.5 mbar
Product description
MV 10C NT
Chemistry diaphragm pump
Four-stage chemistry-design diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors and meet highest requirements. The four-stage design of the eight-cylinder pump MV 10C NT provides the advantageous combination of high pumping speed and very low ultimate vacuum of 0.9 mbar in a very compact design. All internal parts in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE sandwich diaphragms increase reliability and extend operating life. Upgraded with an exhaust waste vapor condenser (EK) the MV 10C NT +EK provides an excellent, environmentally friendly system with efficient solvent recovery. A separator for the inlet (AK) made of glass (with protective coating) against particles and liquid droplets is available as an optional accessory.
Technical Data
Technical data and graphs
| Item number | 20744302 |
| Max. pumping speed 50 Hz | 9.5 m³/h |
| Max. pumping speed 60 Hz | 5.6 cfm |
| Ultimate vacuum | 0.9 mbar |
| Ultimate vacuum in torr | 0.68 torr |
| Ultimate vacuum with gas ballast | 1.5 mbar |
| Ultimate vacuum with gas ballast in torr | 1.1 torr |
| Number of heads | 8 |
| Number of stages | 4 |
| Lower ambient temperature (operation) | 10 °C |
| Upper ambient temperature (operation) | 40 °C |
| Lower ambient temperature (storage) | -10 °C |
| Upper ambient temperature (storage) | 60 °C |
| Max. outlet pressure (abs.) | 1.1 bar |
| Inlet connection | small flange KF DN 25 |
| Outlet connection | Hose nozzle DN 15 mm |
| Rated motor power | 0.53 kW |
| Rated motor speed at 50/60 Hz | 1650 min⁻¹ |
| Protection class IEC 60529 | IP 40 |
| Dimension L in mm | 533 mm |
| Dimension W in mm | 260 mm |
| Dimension H in mm | 359 mm |
| Weight | 28.1 kg |
| Noise (sound pressure level) in dBA at 50 Hz or 1500 rpm/62% (VARIO)/1500 rpm (VARIO-SP)/12500 Upm (VACUU·PURE®) | 50 dBA |
| ATEX conformity | II 3/- G Ex h IIC T3 Gc X Internal Atm. only |
| NRTL certification | No |
| Items supplied | Pump completely mounted, ready for use, with manual. |
| Rated mains voltage range 1 | 200-230 V |
| Mains frequency 1 | 50-60 Hz |
Items supplied
Downloads
Overview Downloads