VV 6Solenoid-operated valves
Overview
- high operating cycles
- significantly better long term tightness even after long operating time
- easy to clean
- versatile connection alternatives via small flange or hose nozzle
- low leakage rate
Articleno.
20674094
Solenoid-operated valves in action
In-line isolation valve VV 6, 230 V / 50-60 Hz, FPM/PP
These straight-through valves with electromagnetic (solenoid) drive are used for operating cycles with short intervals and, therefore, are often used as vacuum control valves. The straightforward design provides a valve with low leakage rate.Technical data and graphs
Upper ambient temperature (operation) | 50 °C | |
Lower ambient temperature (operation) | 0 °C | |
Max. gas temperature | 80 °C | |
Flange connection | Small flange KF DN 16 or hose nozzle DN 6/10 mm | |
Operation | Solenoid 230 V/~ 50-60 Hz | |
Leakage rate | 1 x 10-5 mbar l/s | |
Max. switching frequency | 120 pro Min. | |
Fitting length between flanges | 100 mm |
This might also interest you
-
VM 25 Diaphragm valve
- Chemically resistant
- Hand-operated
- Leak rate 1 x 10-4 mbar l/s
VGL Gas inlet valve- Hand operated
- Fixed, permanent fitting
- Leak rate 1 x 10-9 min l/s
VK 16 Ball valve- For rough and fine vacuum range
- Leak rate 1 x 10-6 min l/s
VKW-B Cooling water valve- Mains plug VACUU·BUS®
- Nominal width 1.5 mm
VV-B 6C Solenoid-operated valves- High operating cycles
- Long term tightness
- Leak rate 1 x 10-2 mbar l/s
VE 16 WIG High vacuum bellow valve- Excellent gas tightness
- Minimum degassing
- Leak rate 1 x 10-9 mbar l/s
VS 25 Butterfly valve- High conductance
- Minimal degassing rate
- Leak rate 1 x 10-6 mbar l/s
Solenoid-operated valves in action
In-line isolation valve VV 6, 230 V / 50-60 Hz, FPM/PP
These straight-through valves with electromagnetic (solenoid) drive are used for operating cycles with short intervals and, therefore, are often used as vacuum control valves. The straightforward design provides a valve with low leakage rate.
Technical data and graphs
Upper ambient temperature (operation) 50 °C Lower ambient temperature (operation) 0 °C Max. gas temperature 80 °C Flange connection Small flange KF DN 16 or hose nozzle DN 6/10 mm Operation Solenoid 230 V/~ 50-60 Hz Leakage rate 1 x 10-5 mbar l/s Max. switching frequency 120 pro Min. Fitting length between flanges 100 mm