MD 12C NT +EKChemistry vacuum system
Overview
- outstanding chemical resistance and superior vapor tolerance
- reduced process time due to particularly high pumping speed even near ultimate vacuum
- whisper quiet and very low vibration
- very good ultimate vacuum even with open gas ballast valve for condensate purge
- excellent environmental friendliness due to efficient solvent recovery
Ultimate vacuum
2 mbar
Ultimate vacuum with gas ballast
4 mbar
Max. pumping speed 50 Hz
12 m3/h
Chemistry vacuum system in action
These chemistry vacuum systems have a wide range of applications like evacuation, evaporation and pumping of gases and vapors. They provide a particularly high pumping speed and are ideal for higher vacuum requirements, e.g., with high boiling solvents. The base pump MD 12C NT obtains a very good ultimate vacuum even with gas ballast and features high performance in a compact design. The consistent design for highest chemical resistance enables almost universal usage in chemistry and pharmaceutics. The waste vapor condenser at the outlet (EK) is highly efficient and compact. The condenser enables near-100-percent solvent recovery, efficient recycling and active protection of the environment. An optional separator at the inlet (AK) made of glass with protective coating retains particles and liquid droplets and can be mounted later to this system.
Technical data and graphs
Max. pumping speed 50 Hz | 12 m3/h | Select diagram |
Max. pumping speed 60 Hz | 7.0 cfm | |
Ultimate vacuum | 2 mbar / 1.5 torr | |
Ultimate vacuum with gas ballast | 4 mbar / 3 torr | |
Number of heads | 8 | |
Number of stages | 3 | |
Vacuum controller | 17 | |
Lower ambient temperature (operation) | 10 °C | |
Upper ambient temperature (operation) | 40 °C | |
Lower ambient temperature (storage) | -10 °C | |
Upper ambient temperature (storage) | 60 °C | |
Max. back pressure (abs.) | 1.1 bar | |
Inlet connection | small flange KF DN 25 | |
Outlet connection | Hose nozzle DN 8-10 mm | |
Coolant connection | 2 x hose nozzle DN 6-8 mm | |
Rated motor power | 0.53 kW | |
Rated motor speed at 50/60 Hz | 1650 min-1 | |
Protection class IEC 60529 | IP 40 | |
Dimension L in mm | 528 mm | |
Dimension B in mm | 387 mm | |
Dimension H in mm | 395 mm | |
Weight | 28.4 kg | |
Noise (sound pressure level) in dBA at 50 Hz or 1500 rpm/62% (VARIO)/1500 rpm (VARIO-SP)/12500 Upm (VACUU·PURE®) | 50 dBA | |
NRTL certification | No | |
Items supplied | Pumping unit completely mounted, ready for use, with manual. | |
Rated mains voltage range 1 | 200-230 V | |
Mains frequency 1 | 50-60 Hz |
Equipment
-
DN 8-10mm Silencer with hose 5cmKF DN 20/25 Clamping ring for small flange
- Quick link
- Nominal width KF DN 20/25
- Material Aluminum
KF DN 20/25 External centring ring for small flange- Nominal width KF DN 20/25
- Material PBT
- Material sealing FKM
KF DN 25, 1000 mm Vacuum tubing PVC with internal stainless steel spiral, with small flanges- PVC with stainless steel spiral
- Nominal width KF DN 25 mm | length 1000 mm
- Leak rate 1 x 10-4 mbar l/s
KF DN 25 / DN 10 mm Small flange with hose nozzle- Hose shaft
- Nominal width KF DN 25
- Material PP
DN 10 mm, sale per meter Rubber vacuum tubing- Natural rubber + SBR
- Nominal width DN 10 mm
- Sale per meter
This might also interest you
-
PC 3001 VARIO select VARIO® chemistry pumping unit
- Ultimate vacuum 2.0 mbar
- Pumping speed 2 m3/h
- Oilfree & chemically resistant
MD 1C Chemistry diaphragm pump- Ultimate vacuum 2 mbar
- Pumping speed 1.3 m3/h
- Oilfree & chemically resistant
MD 4C NT Chemistry diaphragm pump- Ultimate vacuum 1.5 mbar
- Pumping speed 3.4 m3/h
- Oilfree & chemically resistant
MD 4C VARIO select VARIO® chemistry diaphragm pump- Ultimate vacuum 1.5 mbar
- Pumping speed 4.6 m3/h
- Oilfree & chemically resistant
MD 4C NT +2AK Chemistry vacuum system- Ultimate vacuum 1.5 mbar
- Pumping speed 3.4 m3/h
- Oilfree & chemically resistant
MD 4C NT +AK+EK Chemistry vacuum system- Ultimate vacuum 1.5 mbar
- Pumping speed 3.4 m3/h
- Oilfree & chemically resistant
Chemistry vacuum system in action
These chemistry vacuum systems have a wide range of applications like evacuation, evaporation and pumping of gases and vapors. They provide a particularly high pumping speed and are ideal for higher vacuum requirements, e.g., with high boiling solvents. The base pump MD 12C NT obtains a very good ultimate vacuum even with gas ballast and features high performance in a compact design. The consistent design for highest chemical resistance enables almost universal usage in chemistry and pharmaceutics. The waste vapor condenser at the outlet (EK) is highly efficient and compact. The condenser enables near-100-percent solvent recovery, efficient recycling and active protection of the environment. An optional separator at the inlet (AK) made of glass with protective coating retains particles and liquid droplets and can be mounted later to this system.
Technical data and graphs
Max. pumping speed 50 Hz 12 m3/h Select diagram Max. pumping speed 60 Hz 7.0 cfm Ultimate vacuum 2 mbar / 1.5 torr Ultimate vacuum with gas ballast 4 mbar / 3 torr Number of heads 8 Number of stages 3 Vacuum controller 17 Lower ambient temperature (operation) 10 °C Upper ambient temperature (operation) 40 °C Lower ambient temperature (storage) -10 °C Upper ambient temperature (storage) 60 °C Max. back pressure (abs.) 1.1 bar Inlet connection small flange KF DN 25 Outlet connection Hose nozzle DN 8-10 mm Coolant connection 2 x hose nozzle DN 6-8 mm Rated motor power 0.53 kW Rated motor speed at 50/60 Hz 1650 min-1 Protection class IEC 60529 IP 40 Dimension L in mm 528 mm Dimension B in mm 387 mm Dimension H in mm 395 mm Weight 28.4 kg Noise (sound pressure level) in dBA at 50 Hz or 1500 rpm/62% (VARIO)/1500 rpm (VARIO-SP)/12500 Upm (VACUU·PURE®) 50 dBA NRTL certification No Items supplied Pumping unit completely mounted, ready for use, with manual. Rated mains voltage range 1 200-230 V Mains frequency 1 50-60 Hz für Zoom klicken
Max. pumping speed 50 Hz
für Zoom klicken
Pump down graph 50 Hz (100 l volume)
Equipment
-
DN 8-10mm Silencer with hose 5cmKF DN 20/25 Clamping ring for small flange
- Quick link
- Nominal width KF DN 20/25
- Material Aluminum
KF DN 20/25 External centring ring for small flange- Nominal width KF DN 20/25
- Material PBT
- Material sealing FKM
KF DN 25, 1000 mm Vacuum tubing PVC with internal stainless steel spiral, with small flanges- PVC with stainless steel spiral
- Nominal width KF DN 25 mm | length 1000 mm
- Leak rate 1 x 10-4 mbar l/s
KF DN 25 / DN 10 mm Small flange with hose nozzle- Hose shaft
- Nominal width KF DN 25
- Material PP
DN 10 mm, sale per meter Rubber vacuum tubing- Natural rubber + SBR
- Nominal width DN 10 mm
- Sale per meter
This might also interest you
-
PC 3001 VARIO select VARIO® chemistry pumping unit
- Ultimate vacuum 2.0 mbar
- Pumping speed 2 m3/h
- Oilfree & chemically resistant
MD 1C Chemistry diaphragm pump- Ultimate vacuum 2 mbar
- Pumping speed 1.3 m3/h
- Oilfree & chemically resistant
MD 4C NT Chemistry diaphragm pump- Ultimate vacuum 1.5 mbar
- Pumping speed 3.4 m3/h
- Oilfree & chemically resistant
MD 4C VARIO select VARIO® chemistry diaphragm pump- Ultimate vacuum 1.5 mbar
- Pumping speed 4.6 m3/h
- Oilfree & chemically resistant
MD 4C NT +2AK Chemistry vacuum system- Ultimate vacuum 1.5 mbar
- Pumping speed 3.4 m3/h
- Oilfree & chemically resistant
MD 4C NT +AK+EK Chemistry vacuum system- Ultimate vacuum 1.5 mbar
- Pumping speed 3.4 m3/h
- Oilfree & chemically resistant