VCL 02Shut off / manual flow control module A1
Overview
Articleno.
20677107
Shut off / manual flow control module A1 in action
VACUU·LAN® shut off-/manual flow control module VCL 02, with connecting part A1, M35, for surface mounting, consisting of A1, B1, C2, D1
with flow control diaphragm to fine-tune the pumping speed, combined with a ball valve for quick opening or closing of the vacuum line - the fine adjustment is retained when the ball valve is closed and reopened.This might also interest you
-
![VACUU·LAN® Mini-Network with
three modules VCL01 fully assembled]()
3 x VCL 01 VACUU·LAN® Mini-Network- Individual configuration
- Vacuum on demand
- High flexibility
![VACUU·LAN® operating part C3-B:
In-line solenoid suction valve
for VACUU-BUS,
with thread M35x1.5mm]()
C3-B Function element solenoid-operated valve- Individual configuration
- Vacuum on demand
- High flexibility
![VACUU·LAN® manual flow control module
VCL 01 with connecting part A1, M35, for
surface mounting, consisting of A1,B1,C2]()
VCL 01 Manual flow control module A1- Individual configuration
- Vacuum on demand
- High flexibility
![VACUU·LAN® T-piece
for PTFE-hose DN 10/8mm]()
3 x DN 10/8 mm VCL T-piece- Individual configuration
- Vacuum on demand
- High flexibility
![VACUU·LAN® shut off-/manual
flow control module VCL 02
with connecting part A5, M35 x 1,5
consisting of A5, B1, C2, D1]()
VCL 02 Shut off / manual flow control module A5- Individual configuration
- Vacuum on demand
- High flexibility
![VACUU·LAN® automatic control module
VCL-B 10 VACUU·BUS, with connecting part
A5, M35 x 1,5 consisting of A5, B1, C3]()
VCL-B 10 Automatic control module A5- Individual configuration
- Vacuum on demand
- High flexibility
![VACUU·LAN® operating part C2:
Manual flow control valve for
basic parts B, with thread M35x1.5mm]()
C2 Function element- Individual configuration
- Vacuum on demand
- High flexibility
![VACUU·LAN® elbow piece 90°
for PTFE-hose DN 10/8mm]()
Shut off / manual flow control module A1 in action
VACUU·LAN® shut off-/manual flow control module VCL 02, with connecting part A1, M35, for surface mounting, consisting of A1, B1, C2, D1
with flow control diaphragm to fine-tune the pumping speed, combined with a ball valve for quick opening or closing of the vacuum line - the fine adjustment is retained when the ball valve is closed and reopened.
