Articleno.
20698161

RZ 6 +FO +VS 16 +VACUU·VIEW extendedPackage rotary-vane pump

Overview

  • high flow rates even at vacuum levels approaching ultimate vacuum
  • high water vapor tolerance due to efficient gas ballast; very good ultimate vacuum even with gas ballast
  • vacuum-tight at switch-off; external anti-suckback valve not needed
  • large oil volume: Long intervals between oil changes
  • ease of maintenance due to telescopic design

Ultimate vacuum

2 x 10-3 mbar

Ultimate vacuum with gas ballast

1 x 10-2 mbar

Max. pumping speed 50 Hz

5.7 m3/h

On demand

Inquire

Package rotary-vane pump in action

These powerful rotary vane pumps feature a particularly compact design and low weight for pumps of this capacity. They are the ideal solution for a wide range of laboratory and process applications that require low ultimate vacuum at medium to increased gas flow rate. The two-stage rotary vane pump RZ 6 is also available as a package including pump, oil mist filter FO, valve VS 16 and vacuum gauge VACUU·VIEW extended. Rotary vane pumps are used when an ultimate vacuum between a few mbar and down to 10-3 mbar has to be attained. Typical applications are degassing, lyophilization, fine vacuum distillation and drying chambers. The pumping unit PC 3 is the perfect choice for applications requiring special protection of pump and environment. Designed for the use in chemical laboratories the cold trap helps the pumps to handle large volumes of condensable vapors. The cold trap is metalized for extended coolant life and protected against implosion.

Technical data and graphs

Max. pumping speed 50 Hz 5.7 m3/h Select diagram
Max. pumping speed 60 Hz 4.0 cfm Select diagram
Ultimate partial vacuum (abs.) without gas ballast 4 x 10-4 mbar
Ultimate vacuum 2 x 10-3 mbar / 1.5 x 10-3 torr
Ultimate vacuum with gas ballast 1 x 10-2 mbar / 0.75 x 10-2 torr
Number of stages 2
Vacuum controller VACUU·VIEW extended
Water vapor tolerance with gas ballast 40 mbar
Lower ambient temperature (operation) 12 °C
Upper ambient temperature (operation) 40 °C
Lower ambient temperature (storage) -10 °C
Upper ambient temperature (storage) 60 °C
Max. back pressure (abs.) 1.1 bar
Oil capacity (B-Oil) min. 0.34 l
Oil capacity (B-Oil) max. 0.65 l
Inlet connection Small flange KF DN 16 / hose nozzle DN 10 mm
Outlet connection Hose nozzle DN 8-10 mm
Rated motor power 0.3 kW
Rated motor speed at 50/60 Hz 1500/1800 min-1
Protection class IP 40
Dimension L in mm 370 mm
Dimension W in mm 227 mm
Dimension H in mm 207 mm
Weight 17.2 kg
Noise level at 50 Hz, typ. 50 dBA
NRTL certification No
Items supplied Pump oil filled and completely mounted, ready for use, with manual, with oil mist filter FO, valve VS 16 and vacuum gauge VACUU·VIEW extended.
Rated mains voltage range 1 230 V
Mains frequency 1 50-60 Hz

vac_pumpingspeedm3 für Zoom klicken

Max. pumping speed 50 Hz

vac_pumpingspeedcfm für Zoom klicken

Max. pumping speed 60 Hz

vac_pumpingcurve50 für Zoom klicken

Pump down graph 50 Hz (10 l volume)

vac_pumpingcurve60 für Zoom klicken

Pump down graph 60 Hz (10 l volume)

Downloads

Please select a plug type to obtain its operating instructions.

Equipment

This might also interest you

Package rotary-vane pump in action

These powerful rotary vane pumps feature a particularly compact design and low weight for pumps of this capacity. They are the ideal solution for a wide range of laboratory and process applications that require low ultimate vacuum at medium to increased gas flow rate. The two-stage rotary vane pump RZ 6 is also available as a package including pump, oil mist filter FO, valve VS 16 and vacuum gauge VACUU·VIEW extended. Rotary vane pumps are used when an ultimate vacuum between a few mbar and down to 10-3 mbar has to be attained. Typical applications are degassing, lyophilization, fine vacuum distillation and drying chambers. The pumping unit PC 3 is the perfect choice for applications requiring special protection of pump and environment. Designed for the use in chemical laboratories the cold trap helps the pumps to handle large volumes of condensable vapors. The cold trap is metalized for extended coolant life and protected against implosion.

Technical data and graphs

Max. pumping speed 50 Hz 5.7 m3/h Select diagram
Max. pumping speed 60 Hz 4.0 cfm Select diagram
Ultimate partial vacuum (abs.) without gas ballast 4 x 10-4 mbar
Ultimate vacuum 2 x 10-3 mbar / 1.5 x 10-3 torr
Ultimate vacuum with gas ballast 1 x 10-2 mbar / 0.75 x 10-2 torr
Number of stages 2
Vacuum controller VACUU·VIEW extended
Water vapor tolerance with gas ballast 40 mbar
Lower ambient temperature (operation) 12 °C
Upper ambient temperature (operation) 40 °C
Lower ambient temperature (storage) -10 °C
Upper ambient temperature (storage) 60 °C
Max. back pressure (abs.) 1.1 bar
Oil capacity (B-Oil) min. 0.34 l
Oil capacity (B-Oil) max. 0.65 l
Inlet connection Small flange KF DN 16 / hose nozzle DN 10 mm
Outlet connection Hose nozzle DN 8-10 mm
Rated motor power 0.3 kW
Rated motor speed at 50/60 Hz 1500/1800 min-1
Protection class IP 40
Dimension L in mm 370 mm
Dimension W in mm 227 mm
Dimension H in mm 207 mm
Weight 17.2 kg
Noise level at 50 Hz, typ. 50 dBA
NRTL certification No
Items supplied Pump oil filled and completely mounted, ready for use, with manual, with oil mist filter FO, valve VS 16 and vacuum gauge VACUU·VIEW extended.
Rated mains voltage range 1 230 V
Mains frequency 1 50-60 Hz

vac_pumpingspeedm3 für Zoom klicken

Max. pumping speed 50 Hz

vac_pumpingspeedcfm für Zoom klicken

Max. pumping speed 60 Hz

vac_pumpingcurve50 für Zoom klicken

Pump down graph 50 Hz (10 l volume)

vac_pumpingcurve60 für Zoom klicken

Pump down graph 60 Hz (10 l volume)

Downloads

Please select a plug type to obtain its operating instructions.

Equipment

This might also interest you