VACUU·SELECTComplete controller built-in version
Overview
- supplied complete and ready for use, including integrated valve and common hose connections
- predefined vacuum applications and automatic boiling point detection saves time
- simple setup - connect VACUU·SELECT in-line between pump and vacuum application
- integrated vent valve allows inert gas connection
- integrated check valve minimizes interaction with other applications on the same vacuum supply
Complete controller built-in version in action
The VACUU·SELECT complete controller provides enhanced process efficiency to applications supported by a vacuum source such as a basic pump or a powerful vacuum network. The VACUU·SELECT controller has you covered. Use manual set-point-control for simple processes, run pre-defined applications at the touch of a button, or create your own application with simple drag-and-drop editing. The controller is available as a benchtop unit, ready for mounting on lab scaffolding, or as a built-in version for lab casework. The integrated controller includes the VACUU·SELECT vacuum controller, a check valve, and a chemical-resistant solenoid isolation valve. The ceramic vacuum sensor and venting valve are built right into the body of the VACUU·SELECT controller. The compact unit is easy to install and setup. With its intuitive, application-based interface, the controller offers predefined vacuum processes for all common laboratory applications. In the case of solvent evaporation, it detects the boiling pressure and then holds the pressure level stable using two-point control.
Technical data and graphs
| Upper measuring limit in mbar/hPa | 1080 mbar | |
| Upper measuring limit in torr | 810 torr | |
| Lower measuring limit in mbar/hPa | 0.1 | |
| Lower measuring limit in torr | 0.1 torr | |
| Measurement principle | Ceramic diaphragm (alumina), capacitive, gas indep., absolute pressure | |
| Accuracy of measurement | < +- 1 mbar/hPa/torr / +- 1 digit (after adjustment, constant temp.) mbar/hPa/torr | |
| Vacuum sensor | VACUU·SELECT Sensor | |
| Temperature coefficient | < 0.15 mbar/hPa/0.11 torr /K mbar/hPa/torr /K | |
| Vacum connection | PTFE tubing connection 10/8 mm | |
| Venting valve | Integrated, hose nozzle DN 4-5 mm | |
| Lower ambient temperature (storage) | -10 °C | |
| Upper ambient temperature (storage) | 60 °C | |
| Lower ambient temperature (operation) | 10 °C | |
| Upper ambient temperature (operation) | 40 °C | |
| Max. media temperature for continuous operation | 40 °C | |
| Max. media temperature short term | 80 °C | |
| Material of outer housing | Robust plastic housing with good chemical resistance | |
| Protection class IEC 60529 | IP 40 | |
| Protection class UL50E | Type 1 | |
| Protection class front side IEC 60529 | IP 41 | |
| Protection class UL50E front side | Type 2 | |
| Dimension L in mm | 152 mm | |
| Dimension B in mm | 126 mm | |
| Dimension H in mm | 108 mm | |
| Weight | 1.3 kg | |
| Max. current for VACUU BUS (24V DC) | 4 A | |
| Cable length connection in m | 2 m | |
| Interface | Ethernet (RJ45): Modbus TCP / USB (Type A): Data transfer, software update, RS-232 (additional adapter required) | |
| NRTL certification | Yes | |
| ATEX conformity | II 3/- G Ex h IIC T4 Gc X Internal Atm. only | |
| Items supplied | VACUU·SELECT complete controller build-in version, for VACUU·LAN work stations, with solenoid valve, non-return valve, integrated ceramic diaphragm vacuum sensor and venting valve. With power supply, ready to use, with manual. |
Downloads
Equipment
-
![VACUU·SELECT user management]()
VACUU·SELECT User Management Function extension for VACUU·SELECT controller- Flexible and individual permissions
- Ensure consistent process parameters
- Customized working environment
![Rubber vacuum tubing, DN 8,price per meter]()
DN 8 mm, sale per meter Rubber vacuum tubing- Natural rubber + SBR
- Nominal width DN 8 mm
- Sale per meter
This might also interest you
-
![VACUU·SELECT complete controller for lab scaffoldmounting, with solenoid valve, PVDF/fluoroplastics,100-230V / 50-60Hz, plug CEE/CH/UK/US/AUS/CN]()
VACUU·SELECT Complete controller for scaffold mounting- Control down to 0.1 mbar
- Automatic boiling point detection
- Predefined vacuum applications
![VACUU·SELECT package for fine vacuum controlwith VACUU·VIEW extended for KF DN 16, within-line isolation valve VV-B 15C, T-piece,hose nozzle DN 10 and connecting parts DN 16,100-230V / 50-60Hz, plug CEE/CH/UK/US/AUS/CN]()
VACUU·SELECT + VACUU·VIEW extended, KF DN 16 Package fine vacuum control- Control down to 10-3 mbar.
- Automatic boiling point detection
- Predefined vacuum applications
![VACUU·SELECT package for fine vacuum control withVACUU·VIEW extended for KF DN 25, stainless steel,with in-line, isolation valve VV-B 15C, T-piece,hose nozzle DN, 10 and connecting parts DN 25,100-230V / 50-60Hz, plug CEE]()
VACUU·SELECT + VACUU·VIEW extended, KF DN 25 Package fine vacuum control (stainless steel)- Control down to 10-3 mbar.
- Automatic boiling point detection
- Predefined vacuum applications
![VACUU·SELECT complete controller,bench-top device, with solenoid valve,PVDF/fluoroplastics,100-230V / 50-60Hz, plug CEE/CH/UK/US/AUS/CN]()
VACUU·SELECT Complete controller benchtop device- Control down to 0.1 mbar
- Automatic boiling point detection
- Predefined vacuum applications
Complete controller built-in version in action
The VACUU·SELECT complete controller provides enhanced process efficiency to applications supported by a vacuum source such as a basic pump or a powerful vacuum network. The VACUU·SELECT controller has you covered. Use manual set-point-control for simple processes, run pre-defined applications at the touch of a button, or create your own application with simple drag-and-drop editing. The controller is available as a benchtop unit, ready for mounting on lab scaffolding, or as a built-in version for lab casework. The integrated controller includes the VACUU·SELECT vacuum controller, a check valve, and a chemical-resistant solenoid isolation valve. The ceramic vacuum sensor and venting valve are built right into the body of the VACUU·SELECT controller. The compact unit is easy to install and setup. With its intuitive, application-based interface, the controller offers predefined vacuum processes for all common laboratory applications. In the case of solvent evaporation, it detects the boiling pressure and then holds the pressure level stable using two-point control.
Technical data and graphs
Upper measuring limit in mbar/hPa 1080 mbar Upper measuring limit in torr 810 torr Lower measuring limit in mbar/hPa 0.1 Lower measuring limit in torr 0.1 torr Measurement principle Ceramic diaphragm (alumina), capacitive, gas indep., absolute pressure Accuracy of measurement < +- 1 mbar/hPa/torr / +- 1 digit (after adjustment, constant temp.) mbar/hPa/torr Vacuum sensor VACUU·SELECT Sensor Temperature coefficient < 0.15 mbar/hPa/0.11 torr /K mbar/hPa/torr /K Vacum connection PTFE tubing connection 10/8 mm Venting valve Integrated, hose nozzle DN 4-5 mm Lower ambient temperature (storage) -10 °C Upper ambient temperature (storage) 60 °C Lower ambient temperature (operation) 10 °C Upper ambient temperature (operation) 40 °C Max. media temperature for continuous operation 40 °C Max. media temperature short term 80 °C Material of outer housing Robust plastic housing with good chemical resistance Protection class IEC 60529 IP 40 Protection class UL50E Type 1 Protection class front side IEC 60529 IP 41 Protection class UL50E front side Type 2 Dimension L in mm 152 mm Dimension B in mm 126 mm Dimension H in mm 108 mm Weight 1.3 kg Max. current for VACUU BUS (24V DC) 4 A Cable length connection in m 2 m Interface Ethernet (RJ45): Modbus TCP / USB (Type A): Data transfer, software update, RS-232 (additional adapter required) NRTL certification Yes ATEX conformity II 3/- G Ex h IIC T4 Gc X Internal Atm. only Items supplied VACUU·SELECT complete controller build-in version, for VACUU·LAN work stations, with solenoid valve, non-return valve, integrated ceramic diaphragm vacuum sensor and venting valve. With power supply, ready to use, with manual. Downloads
VACUU·SELECT complete controllerbuilt-in version, for VACUU·LAN work stations,with solenoid valve, PVDF/fluoroplastics,100-230V / 50-60Hz, plug CEE/CH/UK/US/AUS/CNVACUU·SELECT Complete controller built-in versionEquipment
-
![VACUU·SELECT user management]()
VACUU·SELECT User Management Function extension for VACUU·SELECT controller- Flexible and individual permissions
- Ensure consistent process parameters
- Customized working environment
![Rubber vacuum tubing, DN 8,price per meter]()
DN 8 mm, sale per meter Rubber vacuum tubing- Natural rubber + SBR
- Nominal width DN 8 mm
- Sale per meter
This might also interest you
-
![VACUU·SELECT complete controller for lab scaffoldmounting, with solenoid valve, PVDF/fluoroplastics,100-230V / 50-60Hz, plug CEE/CH/UK/US/AUS/CN]()
VACUU·SELECT Complete controller for scaffold mounting- Control down to 0.1 mbar
- Automatic boiling point detection
- Predefined vacuum applications
![VACUU·SELECT package for fine vacuum controlwith VACUU·VIEW extended for KF DN 16, within-line isolation valve VV-B 15C, T-piece,hose nozzle DN 10 and connecting parts DN 16,100-230V / 50-60Hz, plug CEE/CH/UK/US/AUS/CN]()
VACUU·SELECT + VACUU·VIEW extended, KF DN 16 Package fine vacuum control- Control down to 10-3 mbar.
- Automatic boiling point detection
- Predefined vacuum applications
![VACUU·SELECT package for fine vacuum control withVACUU·VIEW extended for KF DN 25, stainless steel,with in-line, isolation valve VV-B 15C, T-piece,hose nozzle DN, 10 and connecting parts DN 25,100-230V / 50-60Hz, plug CEE]()
VACUU·SELECT + VACUU·VIEW extended, KF DN 25 Package fine vacuum control (stainless steel)- Control down to 10-3 mbar.
- Automatic boiling point detection
- Predefined vacuum applications
![VACUU·SELECT complete controller,bench-top device, with solenoid valve,PVDF/fluoroplastics,100-230V / 50-60Hz, plug CEE/CH/UK/US/AUS/CN]()
VACUU·SELECT Complete controller benchtop device- Control down to 0.1 mbar
- Automatic boiling point detection
- Predefined vacuum applications
