You are now switching to the shop

Your shopping cart will be emptied when you switch to another country/region.

Product description

RZ 2.5

Rotary vane pump

The one-stage RE 2.5 and two-stage RZ 2.5 are high-performance rotary vane pumps with extra compact design and low weight. They are the ideal solution for a wide range of laboratory and process applications that require low ultimate vacuum at medium gas flow rate. The RZ 2.5 is also available combined with the oil mist filter (FO) and the VS 16 valve as a package.

Information on the disposal of old devices »

Accessories and spare parts
DN 8 mm Vacuum tubing transparent
20686061
Upon request
Technical Data

Technical data and graphs

Item number 20798122
Max. pumping speed 50 Hz 2.3 m³/h
Max. pumping speed 60 Hz 1.65 cfm
Ultimate partial vacuum (abs.) without gas ballast 4 x 10⁻⁴ mbar
Ultimate vacuum 2 x 10⁻³ mbar
Ultimate vacuum in torr 1.5 x 10⁻³ torr
Ultimate vacuum with gas ballast 1 x 10⁻² mbar
Ultimate vacuum with gas ballast in torr 0.75 x 10⁻² torr
Number of stages 3
Lower ambient temperature (operation) 12 °C
Upper ambient temperature (operation) 40 °C
Lower ambient temperature (storage) -10 °C
Upper ambient temperature (storage) 60 °C
Max. outlet pressure (abs.) 1.1 bar
Oil capacity (B-Oil) min. 0.36 l
Oil capacity (B-Oil) max. 0.84 l
Inlet connection Small flange KF DN 16 / hose nozzle DN 10 mm
Outlet connection Hose nozzle DN 8-10 mm
Rated motor power 0.1 kW
Rated motor speed at 50/60 Hz 1500/1800 min⁻¹
Protection class IEC 60529 IP 40
Dimension L in mm 390 mm
Dimension W in mm 156 mm
Dimension H in mm 240 mm
Weight 14.2 kg
Noise (sound pressure level) in dBA at 50 Hz or 1500 rpm/62% (VARIO)/1500 rpm (VARIO-SP)/12500 Upm (VACUU·PURE®) 48 dBA
NRTL certification No
Items supplied Pump oil filled and completely mounted, ready for use, with manual.
Rated mains voltage range 1 230 V
Mains frequency 1 50-60 Hz
Items supplied
Pump oil filled and completely mounted, ready for use, with manual.
Applications

Application examples

Schlenk Line
Schlenk Line
Lyophilisation (freeze drying)
Lyophilisation (freeze drying)

Schlenk Line

For work requiring the removal of oxygen and moisture, or for residual drying, a low ultimate vacuum in the range of 10⁻³ mbar is required. Two-stage rotary vane pumps, the Chemie-HYBRID RC 6 pump, and the oil-free VACUU·PURE 10C screw pump meet this requirement. When using aggressive media, a cold trap is required for corrosion protection. The chemical-resistant VACUU·PURE 10C generally does not require a cold trap. Furthermore, it requires no operating fluids, making it suitable for continuous processes and allowing it to be operated overnight without any issues.

Schlenk Line

Lyophilisation (freeze drying)

In freeze-drying, drying occurs through sublimation—the direct transition from the solid to the gaseous state. This requires pressures in the high-vacuum range, well below 1 mbar. A critical factor here is the rapid and controlled reduction of pressure during primary drying to prevent melting. For residual drying (secondary drying) and high degrees of drying, ultimate pressures in the range of 10⁻³ mbar are necessary. These requirements are met by two-stage rotary vane pumps, the Chemise-HYBRID RC 6 pump, and the VACUU·PURE 10C screw pump. The design of the pumping speed is based on the capacity of the ice condenser to optimally balance the sublimation and resublimation rates.

Lyophilisation (freeze drying)
Downloads

Overview Downloads

image
Brochure | PDF | 2.1 MB 2 MB
image
Technical Data Sheet | PDF | 3.9 MB 2.1 MB 2.1 MB 2.1 MB 2.2 MB
image
Safety information
Multilingual Download download
Safety information | PDF | 2.7 MB